OK this is how I view it. 1. The yellow 3 tooth TCT cutter is basically for cutting holes and not artisian type work that you and others do making wheels. 2. Its basically a very efficient hole cutter and designed for electricians. When I say efficient I really mean it will almost pull you through the hole if you let it ! 3. I know of a set sold by Trade tools and others no doubt. 4. Not the choice for precision woodworking, (unless you want to borrow my wheel sanding jig to finish the edges) 5. Now 6.0 or thereabouts EMC is OK when its up around 12 its getting critical.
Summed up like a true professional RC... Played around today, trying a few combinations and totally agree... at least I can't see any other reason why I'm such a failure.
For what I need, I want smooth and not speed, so I'm not gonna rush out and upgrade all my bi-metals.
When I say efficient I really mean it will almost pull you through the hole if you let it !
Now that makes sense as I kept trying to limit feed, yet a few times it overloaded the drill and stopped it.
If your first cut is too short... Take the second cut from the longer end... LBD
Now that makes sense as I kept trying to limit feed, yet a few times it overloaded the drill and stopped it.
Most wood drills require frequent unloading. If you don't do this, it will get stuck or it will break. Also called woodpecker drilling.
I always used to do that... but since I started using that "relief hole" I found I could get away not doing it... I still do it but found I just don't have to.
I did the same with the TCT, but maybe I brought it down too hard (???) on one of the plunges.
If your first cut is too short... Take the second cut from the longer end... LBD
I still have my wire brush on standby whenever I use any of my holesaws Pick the size you need and along comes a wire brush as an accessory. I have a 102mm holesaw and i see you can get a 145mm one from total tools yee gods
bloody compressor yep same issue now with so much heat its dodgy smoke alarms going off for 10 seconds,(just enough for you to set about trying to find which one then the annoying problem stops. ... I should say Oh bah Humbug!
RobsCastle commented about 17 hours ago bloody compressor yep same issue now with so much heat its dodgy smoke alarms going off for 10 seconds,(just enough for you to set about trying to find which one then the annoying problem stops. ... I should say Oh bah Humbug!
Compressor???
If your first cut is too short... Take the second cut from the longer end... LBD
