Woodworking Blogs

[rm450-65-hdwallpaper.jpg] Image by rawpixel.com on Freepik

Our museum received a Gledhill-Brook time recorder as a donation. It has fallen to me to bring it back from the dead. This where it stands right n...

Before I started another mess, I marked out some strategic lines for checking the shape. Also, I cut off the neck at the 12th fret position. This i...

Putting a docking plug into a drawer.  I like the swing arm that houses the wires so the don't get out of control. They're expensive, but if the cl...

Hello again! Upon having all the drawers completed apart from the fronts it was time to decide on a design I toyed with the idea of having beaded e...

I think this is basic,  but will share for anyway. I have 4 doors. With the length of my stock, I can get 1 long and 1 short out of each rip. So I...

Building some small upper cabinets that will go above a couple of undercounter wine refers. The cabinets will have LED lights on the bottom and ins...

I'm still working on ideas for the climbing components, but since this is a Christmas present for my wife and daughter, I need to have something to...

Boys and Girls,   As I grow older,  my memory barely remembers where I put down my cask-o-vino,  [LBD_Old, glassed toothed.png] let alone what mea...

With the sanding out of the way and the threaded couplers epoxied into the feet, the only thing left for the upright components was to apply some f...

Your projects are now presented on the Craftisian in all their glory. Gone are the square-cropped thumbnails that didn't present majority of the pr...

 Worked on the radiator and front fenders. [Image] [Image] Added a smaller bearing to my flush cuter bit. Adds just enough lip to get er done. [...