Woodworking Blogs

There have been record-breaking 314 projects posted in December. Congrats to Bentlyj for winning the One-Plank Woodworking Projects by Andy Standin...

and I don't mean that in the pleasurable way. Boys and Girls,  Just did this today... with still my dodgy leftie (arm)... so here you are. If y...

I decided to tackle the twisted stem section in parallel with the padlock and I kind of jumped between the two as I progressed. First off, I drill...

“This blog was originally posted on another woodworking forum back in 2015. The fact that I finished this project a long time ago means you won't h...

Boys and Girls, After finding an appropriately wide panel (past constructions), the first step was to cut to length. My Kapex has a reach of only ...

 Now it is time to carve the bowl of the spoon. Since the top surface of the spoon bowl needs to be lowered somewhat and I will lose my drawing of ...

I was going to do the padlock next after roughing out the chain, but once I started on the chain I was enjoying myself so much that I just kept rig...

I haven't done too much actual work but made some progress. [IMG_0188.JPG] I have this 3D carver so i brushed off the dust and set it up to do carv...

In this episode, I show you how I tackled the caged ball section of the Welsh Love Spoon. I started by squaring the outside of the cage and transfe...

There is a lot of down time during these days so its not representative of the actual task duration but cannot be avoided. The drawer construction ...

Okay. In the last installment I noted that a glued up drawer front / sides piece went kinda 'parallelogram' on me overnight. To affect a repair, I ...

This is an idea that I have had kicking around in my head for a while now but faced with the task of making four new sets of steel blade clamps fo...