Woodworking Blogs

Set-up & Link to Video Trailer This second installment of the #444 mini-series details the set-up required to use the Stanley Dovetail Tongue and ...

Recently I restored a vintage 6" mortise gauge by I. Sorby. [qzr1l3z.jpg] I mentioned that I had to replace the spurs (points) on it and was asked...

For the shapes of the climbing modules, I took inspiration from the simple circle-triangle-square shapes that were repeated throughout the 2021 Net...

Down to where I can see the bottom of the depth limit holes so I marked each one with a pencil. [17268FC9-78C5-42FF-BA75-F7B66E8F91E2.jpeg] After m...

[rm450-65-hdwallpaper.jpg] Image by rawpixel.com on Freepik

Our museum received a Gledhill-Brook time recorder as a donation. It has fallen to me to bring it back from the dead. This where it stands right n...

Before I started another mess, I marked out some strategic lines for checking the shape. Also, I cut off the neck at the 12th fret position. This i...

Putting a docking plug into a drawer.  I like the swing arm that houses the wires so the don't get out of control. They're expensive, but if the cl...

Hello again! Upon having all the drawers completed apart from the fronts it was time to decide on a design I toyed with the idea of having beaded e...

I think this is basic,  but will share for anyway. I have 4 doors. With the length of my stock, I can get 1 long and 1 short out of each rip. So I...

Building some small upper cabinets that will go above a couple of undercounter wine refers. The cabinets will have LED lights on the bottom and ins...

I'm still working on ideas for the climbing components, but since this is a Christmas present for my wife and daughter, I need to have something to...