Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
RobsCastle
832 posts
and
21 followers
in about 9 years
in about 9 years
CNNP Sheoak Coasters #2: Surface Finishs
This is
part 2
in a
5 part
series:
CNNP Sheoak Coasters
I got the disc sander going again and 60 Grit the coasters and timbermate.
I then switched back to the half sheet sander for 80 120 and 240 grit.
I found the easier to control everything by using the cork backing gripping the concrete driveway.
Blew the off with compressed air between trips to the bin as I swapped out various grits.
Mind you i didn't see a real difference, (apart from my stocks of sandpaper reducing!) but the surface was getting slippery to touch so I called it quits at 240.
Applied a first coat of surface finish and packed up for the day.
Not a lot of progress in this post as I was plagued with intermittent rain all day.
So as a form of compensation I will do a "Beal Buff "on one just to see the effect, and satisfy my own curiosity as well.
Regards Rob
11 Comments
I got the disc sander going again
So Amelia is now missing a sander as well!
I was plagued with intermittent rain all day.
Moonlighting with the weather bureau...
you reporting/recording 240mm of rain?
by using the cork backing gripping the concrete driveway.
Have you tried/heard_of a hybrid of rubber/cork?
(1.5mm and 3mm)... Don't ask... I'm just telling you about it.
If your first cut is too short... Take the second cut from the longer end... LBD
I get you so what the good Oil?
Regards Rob
Valvolene!
If your first cut is too short... Take the second cut from the longer end... LBD
They are looking great!
lookin good rob. why didn't you use double sided tape. ?
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
They are coming out real nice, can't wait to see the finished pictures. Great job.
Pottz
lookin good rob. why didn't you use double sided tape. ?
Living down under, though Queensland is encroaching on expatriatism , wouldn't that negate the principle of DS tape?
If your first cut is too short... Take the second cut from the longer end... LBD
damn ill never understand duck speak ?
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
All us Anatinae speak in tongues,
we don't expect plebeians to comprehend the sacred words!
we don't expect plebeians to comprehend the sacred words!
If your first cut is too short... Take the second cut from the longer end... LBD
OK Pottzy
Fes up time!
you trying to tell us you are unaware of rubber gear, bonding, Leather goods, whips, restraints and all that sort of entertainment ? tee hee
Fes up time!
you trying to tell us you are unaware of rubber gear, bonding, Leather goods, whips, restraints and all that sort of entertainment ? tee hee
Regards Rob
i think i remember someone talking about it once, but i live a pure clean lifestyle rob so it's kinda foreign to me ? 😬😁
working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.
