First of many coats, this fit really take a few to get it where I want it with the ebony stain. 1st coat 2nd coat Oh and the Chardonnay panels are ...

Poly Coat #4 is in the books. Now switching to satin and 400 wet sanding.

Finally got this thing complete and tested it out. It sounds great and goes a lot lower than I expected.

I started with a new T and J project. A lattice boom crane. I first wanted to make a intarsia coon, but the patterns are not yet arrived. Therefore...

A lot of work is done making all the tracks. Below the pictures. Thanks for watching.

Today I finished the caterpillar tracks. Below the last pictures. Thanks for watching

I started building a chevalet. I want to thank Paul (aka shipwright) and Mike for their help. Downloaded the Sketch up drawing made by Paul. Yester...

Today I ordered some saw blades for the chevalet and also found a place for storage. Thanks for watching.

Today I got some different (jigsaw) saw blades. But the intarsia pattern isn’t yet there. Therefore, you have to be patient about my experiences wi...

First off… I’m not a creative writer, I’m just going to put that out there. Debbie has asked me to put together a tutorial on how I create a wooden...

Theme: Bits & Pieces Show us your creations using those meticulously cut “bits and pieces” of wood and your marquetry and/or intarsia technique...

Our 7th WoodworkingWeb awards are over and we ended up with 5 entries. I would like to thank you all who participated by submitting entries or voti...

Well I am finally going to build a cross cut sled. I have rounded up the hardware, made a dertimination of size, and glued runners to a piece of fl...

With returning to town from the summer camping experience the wifey is asking me to get at the coffees (2), table build. I have had the birch racke...

Last week I made two hydraulic cylinders. The cylinders should be able to hold the crane boom in position. Therefor I additional made a “clamping” ...

Below pictures from the threaded shaft. Maybe, when you like it, I will make a blog about how it’s made. Thanks for watching.

Yesterday I posted pictures (first two) from the threaded shaft. In this blog you can see how it’s made. Thanks for watching

The wheels were split and again glued together. I love woodworking. First destroy and then reassemble. Below the process Thanks for watching

Today I started making the rims. See pictures below, Next time more. Thanks for watching

Below pictures of making the “circle” parts for the rims. Also pictures from how the nuts are made. Thanks for watching

Im starting this blog for my trailer project. I decided to do a trailer build to save wear and tear on my truck box. Ive searched the internet for ...

Part 1 was a general intro. Now i will talk a little bit about my progress so far. I started obviously by choosing a trailer. This being a low budg...

So Got a chance to rip into today. Got metal floor off and keeping it off. Could only register this trailer for 9,999 lbs. The metal floor and the ...

When I left off last time I said that the “furniture” was done. That wasn’t quite true and it took quite a while to finish the job. Because I will ...

Just a bunch of photos from the last few days to bring the project up to date. When I left off I was about to make the saw frames and the clamp spr...

When I last posted in this blog, I had almost finished the chevys and was feeling about ready for the classes to begin. Well ……. that may have been...