Ron Stewart

In my last painted project (a sideboard), I used General Finishes Milk Paint, and I painted the parts before assembly. I don't think the GF paint i...

The final woodworking step was attaching the legs to the case. As with everything else, I used dowels. The front legs were straightforward. I used...

 The glue-up part of a project is always nerve-wracking for me, and this project was no exception. Dowel joinery helps a lot, but it doesn't totall...

The giraffe's head is one of the more complex parts of the bookcase because both it and its horns and ears are removable (the former for transport,...

The giraffe's tail is is a compound shape formed by a circle, ellipse, and trapezoid. [06.00 Tail Dimensions.jpg] I made a template and used it to...

Cutting the legs turned out to be one of the most troublesome parts of the project, and the part where I made the most mistakes. My original plan ...

Before I could start drilling the dowel holes in the part faces, I had to make the angle-specific drill guide blocks I mentioned in a previous post...

I found four good 8' long, 12" wide, 4/4 poplar boards at the lumberyard, along with a 4' long, 7-1/2" wide, 8/4 board for the legs. Theoretically,...

This series of blog posts describes the design, planning, and construction of the giraffe bookcase I built in 2021 for my daughter, son-in-law, and...

Before I started veneering, I came up with a concept for protective grills. Here's a rendering. Note the narrow frame on top and bottom, and the wa...

There are several ways to attach veneer: hide glue, contact cement, cold glue in a press, etc. The only method I've ever used is the iron-on wood g...

Disclaimer: There is no woodworking content in this post. It exists to show the final pre-veneering steps of the build--the steps that turn cabinet...