Acquired from Urban Ore: https://craftisian.com/entries/2230-wooden-tool-box I threw some Daddy Van’s on this box and it NEEDED it. It was a pain ...
Been a while since the last update.  I went a little crazy last week and picked up a Jet 1020 thickness sander. The local supplier had it on a cle...
Installed the linings for the back panel and sanded flush to the sides. Laser cut the back panel and all the braces. When I get my 120 grit sand pa...
This is probably the most involved piece in the project (yes, even more than the doors). If you refer back to the first part in this blog you will ...
 Since this cabinet is so small I ended up buying some artists brushes for oil paints. [image.png] They really helped with the application of the...
Needed a better picture for the first pic, the next one maybe not the best intro :-) [IMG_2989.jpeg] I have been extremely distracted of late. I g...
I got the bulk of the work finished up this weekend.  I started with a dry fit of the case and then used it to cut the door members to length.  The...
Seems like no matter when I start a project it never gets done before it has to...  Progress has been slow the past couple weeks.  One weekend we h...
When I left off, I had the case members cut, box joints cut and the case dry fit.  Next up was the plywood back.  I cut it the first piece to lengt...
For the drawer pull, I decided on a simple edge-mounted design.  I wanted it to be black to match the legs, and to avoid another round of ebonizing...
When I first came across RyanGi's bow sander here, I bookmarked it meaning to come back and build one for myself; a nifty bit of kit.  As things go...
I've been looking for a kerf extender for playing around with half-blind dovetails.  The one from Cosman is $129.  I'm sure it's top-notch, but too...