Stuff and Things Bowl

614
19
A small carved bowl made from Gambel Oak, from near Taos, NM.

This was such a small chunk of wood (Gambel Oaks don’t grow very large, typically 1-2m tall around here) that rather than turn it round, I decided to carve an oblong bowl. It’s about 3 inches across, and 5 inches long. It'll hold two eggs. Just.

When my sweetie and I are talking about a collection of things, we’ll often refer to it as stuff and things to emphasize that it’s not just stuff. So when I looked at the flats at the ends of the bowl wondering what to carve there, stuff and things came to mind.

May you have the day you deserve!

19 Comments

interesting bowl dave. what size is it ?

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Fun to switch it up from time to time with a little carving. How hard is that Gambel oak to carve?

Mike Peace had an interesting YouTube video on turning oblong pieces that you might find useful for future reference.  It is a great way to utilize (turn) chunks that might otherwise go into the burn pile.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

It’s about 3 inches wide, and 5 long, Pottz.

It’s about as hard to carve as any other oak, Nathan. When green, not bad at all. When dried, pretty dang hard. Nice thing about this is that the earlywood/latewood density differences are small (no real wet season) so it’s at least relatively uniform carving.

May you have the day you deserve!

Looks good Dave!
You could have some fun playing with that sharp heart/sap wood transition in designs.
Very unique, Dave!!

Cheers, Jim ........................ Variety is the spice of life...............Learn something new every day

Nice!  Who doesn't need a place for stuff and things?!  
Looks good!

Ryan/// ~sigh~ I blew up another bowl. Moke told me "I made the inside bigger than the outside".

Thanks, folks!

If I stumble onto some more Gambel oak, I’ll definitely keep that in mind, Splint.

May you have the day you deserve!

very nice GR8 JOB 😍😎👍

*TONY ** Reinholds* ALWAYS REMEMBER TO HAVE FUN

Interesting little bowl, nice carving work. The interior of the bowl is very smooth so I'm assuming this involved a lot of sanding was involved, did it sand easily?
Not much sanding, really. Careful knife and gouge work. With the hard oak, it’s easy to take light cuts. And then in a few spots where I couldn’t get a good knife angle to avoid tearout, I sanded a bit. Went pretty easily, but I used new paper and started with 60 grit. I’d say about the same as white oak.

May you have the day you deserve!

Love the names! But don't you need a divider? It seems like the stuff and things are going to get all mixed together.
I like the wood, but the shape is a reminder of an antique (mid 1800's) bedpan I once saw. It too was hand carved. I suppose things and stuff might be appropriate words. :-)
Stuff and things do tend to get mixed together, Steve. It’s complete chaos, like cats and dogs sleeping together!

The shape is also pretty typical for carved bowls, George. See those made by David F. Fisher for some examples of much nicer bowls than mine.

May you have the day you deserve!

It’s complete chaos, like cats and dogs sleeping together!
Yeah, Just ain't right!
When I first saw it I thought it was something that you turned and finished.  Nice work on carving it.

BTW - I sent you a PM
Thanks Earl! I started it on the lathe, but quickly realized it would be a tiny bowl if I tried to finish it there. 

May you have the day you deserve!

Good looking bowl, I will leave the carving to you and the others, I enjoy my fingers too much and I bleed easily. lol. 
Thanks! Me too, Mike. I have a little carvers vise that held it for much of the work so my fingers weren’t ever really in danger. Thought about digging out the bowl horse, but it’s just as well I didn’t. Weather got more wintry around here again, so I’d have been hauling that back and forth a bunch.

May you have the day you deserve!