3D Crosses #2: Prepare for a Build

36
7

This is part 2 in a 5 part series: 3D Crosses

  1. The Concept
  2. Prepare for a Build
  3. The Build
...
  1. Confession

Earlier this year (2026) I shared the printout with my pastor. The first response was “I want one!” So, I guess I’m going to build one. If I’m going through the effort to build one I might as well build a batch of them. I took the CAD design and set up files for the CNC.
 
The first part is to build the center panel. This is a set of veneers mounted on plywood and then cut to shape. This view shows the veneer with its final shape but it starts out as wider strips that meet in the corner.


This shape is transferred to V-Carve via a DXF file.


The outline is cut with a ¼” straight bit.


The ¼” bit leaves a rounded corner at the intersection of the arms to the post. I do second pass with a 1/16” bit.


The remaining 1/32” radius is pretty easy to clean up later.


Now I’ll create files to cut the arm parts. First I cut away some waste that would be a fragile projectile later (Ask me how I know).


Next I cut the shaped bevel surfaces. The first step is a rough out cut.


Then the finishing cut.


Then I can cut the shelf to hold the plywood center.


And then cut the profile of each piece.


You can see the 4 pieces I removed at the beginning. The same steps are done to create the 6 pieces for the post frame.
 
Next we’ll get into the build.
Steve,

I guess I need to see a final picture to see what you are building.  The plans looks very good.

Petey

ill be watching.

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

It is always fun to see how others approach design and CAD for the CNC.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

Thanks guys!

Petey - the last image of the 1st chapter shows where we are headed. I'm working on the build chapter next.
Love seeing automation take on projects that otherwise would be grueling to do "conventionally".

I'm with Ross (and Sponge Bob)!