3D Crosses #4: A Special Feature

11
0

This is part 4 in a 5 part series: 3D Crosses

  1. The Concept
...
  1. The Build
  2. A Special Feature
  3. Confession

After building a few of these, I thought it would be nice to have a sting style border between the center panel and the frame. This involves cutting a 0.070” groove just inside the outer edge of the panel, inserting fitted pieces, and then cutting the profiles as before.
 
The groove is laid out in CAD.


Then the profile is set up in V-Carve.


In order to get the insert pieces to follow the tighter curves I have to steam bend them. I use the microwave and wrap them around a piece of PVC pipe.


With the pieces steam bent I adjust the fit for a tight joint at the miters. Then I glue them in place. Once the glue sets I sand the excess off. This is all done with the panel in the CNC.


Then I can cut the profile as before.




Now the panel is ready for the frame.