Craftisian

Eric - the "Loft"

4402 posts and 70 followers
in almost 2 years
0
2

Journey into Timber Framing techniques. #4: Cross Brace Tenons.

399
2

This is part 4 in a 6 part series: Journey into Timber Framing techniques.

tuned up the other mortise and tenons so I didn't have to use a lot of force to fit everything together.

Then I was able to get a good measurement on the cross brace to lay out the second tenon. Repeated the process cut those (had the machines setup still and the stop blocks) then fitted into place.

Better view of the holes on the bottom of the feet, connect the dots later and cut the waste out.

Thanks for reading and following along, comments are always welcome.

Up next: shaping the feet and top.

Main Street to the Mountains

timber framed sawhorses pine tenons

2 Comments

Oldtool commented about 1 year ago
Coming along nicely, all structural joints complete.
Eric - the "Loft" commented about 1 year ago
OldTool, thanks. I am happy with the outcome, and it tells me that I could manage a full-size set.

Main Street to the Mountains

More from Eric - the "Loft"

The Journey of a Kayak Build #3: The Lofting Process The Journey of a Kayak Build #2: A Little Prep Work The Journey of a Kayak Build #1: A little about the project Segment Gluing Jig. #4: Some finishing touches Segment Gluing Jig. #3: Details of a Clamping System
RSS