Hans Wegner's "Bukkestolen"

Because my seat frame components are probably not quite as thick as those in the original, I compensated by making mine slightly wider an limiting ...

Now that the main chair frame is nearly done, I can move on to the independent backrest frame.  I started by creating another template to define th...

While the edges of the backrest parts were still square, I cut the mortises for the dominos.  Ganging the rails together made a self-supporting str...

I used a 1/8" radius round-over bit in a palm router to ease the edges of the weaving slots.   Nesting the rails together provided a stable platfor...

With all the major shaping and sanding completed, I had one last task before glue-up, and that was to pre-drill the seat frame for all the L-nails....

I decided to try my hand at making custom pivot hardware that's similar to what's on the original chair.   I started with a small 150x150x2 plate o...

I've had a plan to stain these chairs from the start of the project.   Red oak looks very 80's-furniture with just a clear finish, which wasn't the...

First thing in the morning of 1/1/25 I started applying the Rubio Monocoat 2C black.  Overall, I was happy with the result.  However, with the addi...

After a day to contemplate the error of my ways, I set to removing the finish from the top of the arms in order to sand the scratches.  I spent som...

A fresh 10lb spool arrived at the end of last week, and I got started making good use of it.   I  wrap the spool in stretch wrap and pull the loose...