More Veneer Pendant Lamps

Originally posted in January 2020 As part of the Spiral Veneer Pendant Lamp project, I came up with an inner shade to envelope the light bulb: ...

Like the spiral pendant, my plan is to use cherry for the ribs and top and bottom caps, anigre veneer, and a BBP ring as the base for the removable...

I'm still just dry fitting here in order to see how things would look with a light inside. [20200118-IMG_3418.jpg] The original plan was to mount t...

With the veneer strips adjusted so they formed loops as close to circular as possible (by eye), I scored the ends where they overlapped on either s...

My plan is to have a unique bottom cover design for each of the pendant lamps, and the for the first one I used an "atomic age" motif. Perhaps fitt...

There's nothing much to see here.  With all the pieces sealed, the glue-up took all of 10 minutes. The roll of masking tape was the perfect size to...

Installing the veneer strips didn't quite go as planned. My initial idea was to apply a little contact cement to hold the overlapped end in place. ...

With the prototype complete, I assembled the remaining two lamps. [20200201-IMG_3503.jpg] [20200202-IMG_3511.jpg] [20200202-IMG_3512.jpg] The bot...