Woodworking Blogs

My current method is using my Dowel Maker . Please follow this link and feel free to make comments. Stock is cut just slightly larger than what y...

  Well, the mini vice mount Hi-Vice gets pretty much constant use, so it’s time to make a nicer one based on the prototype.  Pretty happy with the ...

The chisel method is one of most accurate ways to make dowels. Don't get excited. Read on. Basically you drill a hole of the dowel size you want t...

 I do different kinds of joinery and sometimes use dowels. In addition, I use dowels for making hidden flush hinges. The problem is that store boug...

Another similar simple method to the one I currently use is to use a 1/8" x 1" piece of flat bar from HD and push drill a hole in it. You then make...

There are two ways of making dowel on the router.  Using a fence and round over bit or a jig /die setup similar to the Table Saw method. USING A ...

This method is a jig that's fits over the table saw blade. It is made with input and output dies that will make 1/"4 - 3/"4 dowel. Here are my part...

A while ago, I read Dave Fisher’s post on his Souped-up Sharpening Shelf and thought that sounded like a great idea to get some consistency in my g...

 There has been an aspect of the panel layout that has been bugging me. Now seems as good of a time as any to see if there is anything I can do abo...

A couple of years before my sister asked me to make a new chairback molding.  I had collected the trunk of a dead redbud tree from her yard with th...

This tool seems like it belongs in the Smithsonian, though you won’t easily pry it from my hands. For $15 — yes, fifteen U.S. American simoleons (...

Found this for $20 yesterday, but did not pick it up until today. I took a gamble on nobody noticing what was in the box and it paid off. Sometimes...