Woodworking Blogs

After reaading all the good constructive comments I decided to continue on with my Drink Coaster project But first I need to acknowledge, (wait for...

[Screenshot_۲۰۲۴۰۱۰۵-۰۹۵۰۲۷_Video Player.jpg][Screenshot_۲۰۲۴۰۱۰۴-۲۲۳۱۳۸_Instagram.jpg]

This was my New Years Job. We're staring to remodel and update the entry way and get rid of the 22 year old castle wall look. Nothing extreme,  ju...

Needing a small desk for guest area (Airbnb) that is vintage decor. Reclaiming a cast singer treadle for the base.[image.jpg] During our trip to Te...

تا اینجا اسکلت بدنه کشتی را بریده و کنار هم گذاشته ام. من هر روز بخشی از ساخت و ساز را به شما نشان خواهم داد. امیدوارم از آن خوشت بیاید. با تشکر از...

For the head of the mill i will make the beams that support th mail axel. [image.png] The surface on the "windpeluw" is on a angle to allow the til...

Lets start with the "head" of the mill [image.png] [IMG_20220513_133503.jpg] These are called the "voegberry" The joints are mortise and tenon. [IM...

Dovetailing at the bench. [image.jpg] [IMG_5278.jpeg][IMG_5279.jpeg]

With oversized lengths of veneer cut an jointed, I started work on joining the veneer pieces together in pairs to get the width needed.  I'd need 1...

This is a simple jig and setup I used to put grooved tread patterns on the tyres. Works very well on a drill press. [IMG_20231204_154147669.jpg] A...

Following is how I make my tyres as round as I can get them. [IMG_20231208_140704990.jpg] After cutting the tyre with a band saw and sanding the ou...

Definition for those who I lost. Lofting is taking a set of numbers which are included in a Table of Offset. These numbers define the shape of the ...