Sears Shaper Head

247
13
Hey there,
I was just out on the local community market place for my part of the world and someone has posted for sale the Sear's Craftsman Shaper head set.   Here is a photo of the beast.



Has anyone ever used this.  I had one in the '70s and the recommendation was to use it on a radial arm saw. . . which I happened to also have . . .in the 70's.   While the saw was a total pain to keep trued up to cut a straight line, using this shaper head on it scared the hell out of me.  It sat in the box for probably 35 years or so before I finally junked it.  I didn't sell it since if I didn't want to use it why would I sell it to some unsuspecting person.  

Anyway, I thought i would ask.  I didn't think I would ever see anyone offer one of these sets for sale.  It's a steal for $40 US. . . .and the $75,000 for the medical treatment it might just necessitate.   ;-)

Seriously, has anyone successfully used this and does anyone still use it.

take care,
Dave

13 Replies

using something like that on a RAS is what gave them the scary tool moniker. personally i wouldn't touch that shaper set ! 😬

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

YES i have used this on table saw BUT NEVER  on RAS as mine was wonky enuff without adding extra cutters when we moved is when i got rid of it i also had extra cutter sets with mine 

*TONY ** Denver * ALWAYS REMEMBER TO HAVE FUN

I think that I bought mine for $5 at a garage sale.  I could never get the courage to even run a test piece through my table saw so I sold it at a garage sale for $5.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

I see the opinions are about themes I had.  As for using it on the RAS, the 70s were a strange time and a lot of questionable stuff was done.  All I know is that this set up terrified me. 
Not sure about the Sears, but I my Delta RAS has a special shaper guard that replaces the saw guard. I believe it is recommended to lock the motor in the vertical and all the way back so you run the board edge against the fence and the cutters only poke out like on a shaper table. I do have a shaper with one set of finger joint cutters, but have never used them because the router table is quicker to set up. Infinite uses but you waste time switching between them.And it can be dicey.
i still have and use my RAS for every project ive ever done. but i only do straight 90 degree cuts, and thats it !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

Nothing wrong with it. Saying that, it is NOT a tool you want to launch into full depth. Rather creep up on your final depth of cut. Guards and jigs to protect from flying wood are a smart move. Actually I have seen a few dado setups that were sketchier than these. Those wobble blades have always scared the pee outta me. 
Had one 1964??? Era.   Tried it a time or two on contractors type table saw.    Did not trust it,  got rid of it.   Did not have,a,router back then.     Router Table is my go to now.   Feel much better about the router table usage.

Ron

Forty years ago, in the course of my work, I frequently encountered people who had lost one or more of their fingers—and sometimes even more than just fingers. By the end of my career, thanks to stricter regulations, such incidents had become virtually non-existent!!

The milling tool shown here was never permitted on a RAS for professional use in Europe, even 40 years ago—a sound decision, in my view. Yet, DIY enthusiasts were perfectly free to use such tools. How absurd is that?😒

https://dutchypatterns.com/

well sears totally marketed their RAS to use accessories like this. this is what gave the saws a bad name as a very dangerous saw. some were far worse than that shaper head. used properly for what there really best used for there is no problem. ive used one since i was a teen. i love mine !

working with my hands is a joy,it gives me a sense of fulfillment,somthing so many seek and so few find.-SAM MALOOF.

I remember my grandpa actually using his on the table saw.  It was a ~1hp Craftsman contractor type saw so not as heavy as a cabinet saw (which would certainly be preferred in this application) but better than a jobsite sized saw.  It sounded like an airplane to me and reputedly did ok for making small moulding.  I don't remember what the profile was or if multiple passes were made but I do remember the stock was well constrained with a crude feather board type setup.
We've all had our own version of the "hey, watch this" moment, and for most of us, all ended well or nearly so.  At the time I was contemplating using this device, I was in graduate school for. . .wait for it . . . .Clarinet performance.  Yep, I was a professional clarinetist and part time furniture maker.  Now, these are careers that usually do NOT occur at the same time but in my case, it did.  I still have all 10 digits and had a wonderful musical career.  But even then, with the folly of youth staring me in the face, this device scared the hell out of me.   :-)
I have used this, to make a house full of molding on the RAS with all kinds of hold downs.  I was younder then,

I gave it away, since I have router bits that can do much of what that did.

Petey