rfprice62

  After finishing “the box” containing the windmill and the ditches I added the landscape using insulation foam. (PUR)[IMG_20210730_142921.jpg]  Th...

Let’s make one of the wheels! It’s the wheel at the bottom of the spindle.  [image.png] [image.png] I made the rims on my CNC  [image.png] [imag...

The next parts i'm going to make are the other two wheels and the break of the mill. [image.png] On page two there are some detailed drawings of th...

For the head of the mill i will make the beams that support th mail axel. [image.png] The surface on the "windpeluw" is on a angle to allow the til...

Lets start with the "head" of the mill [image.png] [IMG_20220513_133503.jpg] These are called the "voegberry" The joints are mortise and tenon. [IM...

Next up the axel [image.png] It is made of oak and is one piece. I will modify this to make it easier to disassemble the wings for transport. [IMG_...

Some part of the mill are strengthened by metal. And because there is nowhere to bay them, i will be making it myself[IMG_20221217_103828.jpg] Forg...

To turn the windmill there is a little winder at the tail of the mill. In this short blog entry i will be making this. [image.png] To bevel the fro...

[image.png] To turn the head of the mill into the wind the windmill has a "tail" It is strengthen this construction there are braces to transfer th...

The next parts to be made are a beam for the breaking system of the mill, some rafters and the cladding. On the drawing that would be these parts: ...

It's time to make the wings! [image.png] [image.png] Lets start with a nice piece of straigth oak. I'll be using a old bed railing. It dry and will...

Giving the head a fist layer of green paint, some small details will be white. [20230915_180208.jpg][20240518_121518.jpg] And a first coat for the ...