box

   The hinges were glued to this latest box while held closed by the Vise, and weight was added as a sort of "clamp" to hold them on while the glu...

Here is part 2 of the box build and I have made the change from 1/2" ply to 3/8" ply for the sides and I think it will give a more pleasing and bal...

   It has been a long time... Feeling good lately Health-wise, after a few bumps in the road and Life has kept me very busy! Experiencing a new-fou...

I’m working on a new box This is the CAD design, as far as it goes. I’m not sure about the lid. I’ve started by building the bottom half (sides and...

 The door blank needs to be split into 2 parts - a door top and a door front. I'm going to join them with a mitered rabbet joint. This will be a ne...

A new site, a new beginning. So a fitting first post might be the first project I worked on when I was just a little PAJA. At the time I was living...

Sides and legs made. Sides are 5 × 1 mm alternating Purpleheart and Pau Amarello, bent on an 87.5 to 92.5 mm radius. Legs are 3 mm thick Pau Amarel...

 First up on this day was to correct a mistake I made yesterday. When I cut the back rabbet on the top I had the part turned around. I have been ke...