Craftisian

Dutchy

1350 posts and 56 followers
in over 10 years
0
8

Different techniques applied in making the woodtoy models #2: Making a fender

775
8

This is part 2 in a 3 part series: Different techniques applied in making the woodtoy models

In this series I want to show what different techniques I use to make my models. I appreciate comments, especially if you come up with another proposal to achieve something.

In this second episode you can see how I made the fenders of the 2CV. Enjoy and let me know what you think about it.



https://dutchypatterns.com/

dutchypatterns.com wooden model 2cv

8 Comments

LIttleBlackDuck commented almost 2 years ago

Did you cut that curve with a bandsaw or scroll       saw and then sand?

If your first cut is too short... Take the second cut from the longer end... LBD

Dutchy commented almost 2 years ago
Pictures 5....scroll sawing the curves.

Sanding is for later on

https://dutchypatterns.com/

LIttleBlackDuck commented almost 2 years ago

 Dutchy
 commented about 1 hour ago
new
Pictures 5....scroll sawing the curves.

Sanding is for later on

Bocsánat!... I missed that one.

If your first cut is too short... Take the second cut from the longer end... LBD

SplinterGroup commented almost 2 years ago
I love the process Dutchy, Experience shows!
PapaDave commented almost 2 years ago
Hey Dutchy, Great photos and a terrific idea.  My only question is what happened to the "screw to anchor parts" in Photo 6 is definitely not there in the following photos.  Did you switch to double side tape?

thanks for the insights.  Very helpful.
Dave
Dutchy commented almost 2 years ago
PapaDave
commented 43 minutes ago
Hey Dutchy, Great photos and a terrific idea.  My only question is what happened to the "screw to anchor parts" in Photo 6 is definitely not there in the following photos.  Did you switch to double side tape?

thanks for the insights.  Very helpful.
Dave
I did one with a screw and one with super glue. 

https://dutchypatterns.com/

PapaDave commented almost 2 years ago
Dutchy:   I think superglue is the winner here.  Leaves nothing in the way for sawing and sanding.  Perfect.  Thanks. 
Birdseye49 commented almost 2 years ago
Great to see how you do a build !

More from Dutchy

Safety questions! VW BULLY T1 Camper van #20: VW Bulli T1, Pack rack VW BULLY T1 Camper van #19: VW Bulli T1, Roof VW BULLY T1 Camper van #18: VW Bulli T1, Wheels VW BULLY T1 Camper van #17: VW Bulli T1, Bumpers
RSS