Douglas Fir, 1956 vs 2017

2128
20

Small piece came out my house. What a difference! Imagine what it will look like in another 60 years after they figure out how to GMO it into a single year’s growth to harvest.

Losing fingers since 1969

20 Replies

WoW.

—Madts.

Tor and Odin are the greatest of gods.

Amazing. I have some old growth cherry and the rings are a lot more tight but not as extreme as your fir. With old forest density gone, on top of GMO, we will be lucky if future woods hold a wood screw.

Jack

Someone here posted an interesting video about wooden firemen ladders. They’re preferred because unlike aluminum, they will not collapse without notice. San Fransisco has an inspector at the ladder shop that measures the growth ring density. Home Despot tubafors need not apply for that job. Anyway, they use Douglas Fir and it looked a lot like the top picture. I don’t know where they find it today. Probably a spot held more secret than a good fishing hole.

Losing fingers since 1969

Practically every construction grade 2x it’s pithy. I’ve noticed that all the lumber the scaffold crews carry is stamped “rated for scaffold by OSHA” or something to that effect. I’ll have to look into that so see what the minimum standard is.

Losing fingers since 1969

As a contractor of 30 years I have seen a big change in the grading system in lumber, what use to be #3 or #4 is now graded as #1& #2 . Dealing with demolition on some homes built as far back as the 1800s there is a very wide difference from what homes were built with then versus now. I don’t find Doug fir being mostly pithy but I live in the northwest where it’s logged so the material they send to NY might be of an even lesser grade than here. It’s kind of amusing to me that in UK doug fir is considered something they use for joinery.About the only items, we use Fir for are perhaps replacement of old VG flooring, but I understand that some wood(timber) is less available in the UK.

woodworking classes, custom furniture maker

Here we go. OSHA standards for scaffold planking. Someone inspected it.

https://www.osha.gov/SLTC/etools/scaffolding/planking.html

Losing fingers since 1969

Clear Douglas Fir and spruce is wonderful for making jigs and for shop furniture. Once in a while I’ll see clear untreated spruce 2bys at the home despot for cheap.

Losing fingers since 1969

That top one is pretty amazing. Really beautiful stuff.

Losing fingers since 1969

Not mortgageable due to non standard construction? A Victorian home? That is complete insanity. It’s an existing building. If it was such a fire hazard, it would have burned down a long time ago.

Most Europeans I know turn their noses up at frame construction. I guess they had the story of the 3 little pigs drilled into their heads. You’d think after they get the bill from the electrician for adding an outlet they would change their minds. You better love your cement house because plumbing and electrical changes are gonna cost you.

Losing fingers since 1969

Nice window, by the way.

Losing fingers since 1969

My mother in law is here from Hungary for a few months. We have a Hungarian internet TV set top box connected to the downstairs TV and my wife wanted a TV in her bedroom. The box is capable of multiple output so I snaked a wire up to her bedroom TV. She was amazed at how simple it is to run new wiring in a frame house compared to all the Stone age houses she’s lived in.

Zip zap, done in a couple of hours. It doesn’t work (I think it’s too much interference from my solar panels), but it was no big mess or cost to do the job.

Losing fingers since 1969

LOL. Lumber must be so expensive it can’t be used for stair forms.

Losing fingers since 1969

The quality has dropped a lot in forty years or so.  I made a lot of picture frames out of 2x4's, back in the day.  Lumber yard types scoffed at the prospect, but even the six foot ones are in excellent condition these few decades later.

I worked on the oldest Queen Ann in Olympia, Washington. It's a Heritage house and is called the Byrd House.  The entire house, from the floors (coated with amber shellac) to rafters, is tight grain cedar. The framing is of nominal 2x's, so true 2x's.
Sniff

Even in the 90's, I was able to make picture frames from 2x's (tunnel cuts, router work and some propane and a brass brush).
I can only agree Brian
here is a recycled verandah post due for the burn pile.
the grain is typical of your images

It wouldnt look anything like it these days.

pity I didn't do an end grain shot back in Jun 2019

Regards Rob

The sides of the boxes give a pretty good clue too.
Picked up this small slab of Douglas fir the other day. I just bought it because the Rift-Sawn grain was so tight. definitely old growth. Will likely use it in a small box or cabinet project.

Norman

Norman Pirollo

Would be interesting to see the strength numbers of a piece of fir like this compared to the cottonwood wannbe hemfir we see now.

 
Norman Pirollo
replied 9 days ago
Picked up this small slab of Douglas fir the other day. I just bought it because the Rift-Sawn grain was so tight. definitely old growth. Will likely use it in a small box or cabinet project.

Norman



Norman Pirollo 
If it's heavy, then it's larch

Sasha. - Life is not a draft, you can't redo it tomorrow

It's labeled Douglas Fir by wood vendor and not heavy for its size. Saving it for something special!

Norman Pirollo