Share your craft projects
Make new craft buddies
Ask craft questions
Blog your craft journey
Jack King
1050 posts
and
30 followers
in almost 10 years
in almost 10 years
Bandsaw question
I had a first today while using the bandsaw. Working on a very small piece of wood and the blade broke. The break appears not to be a defective blade because it appears to be all new where it broke. Can anyone recommend a cleaner for the tires as they have some build up? Nothing in the manual about what to use but I don’t want to degrade the tires with some chemical. The saw is a Laguna 14/12. Many thanks in advance for any advise you might offer.
Jack
12 Replies
I use a plastic scraper, no chemicals at all. Plastic won’t hurt the rubber either. At least this works on my Shopsmith 10" bandsaw.
Jamesw
that will work I use air hose to blow off to
jim
I use a stiff bristled brush to clean my tires off.
Rob, Sault Ste. Marie, Ontario
Thanks guys. I cut some pine awhile back and there is really some tough residue on the tires.
Jack
If you have pine sap use some mineral spirits to wipe it down
woodworking classes, custom furniture maker
that’s works good to jim pine the worst on tires
jim
Thanks Jim and Jim, mineral sprits did the trick.
Jack
Just a heads up, people use ammonia cleaner on printer rollers because alcohol washes the talc or talc like material out of rubber. As such, it would be one of the things to avoid.
I saw an article where a guy used an old metal ruler to scrape the tires clean.
Jack, I’ve broken my share of blades but since I starting following Alex Snodgrass and his video, I’ve not broken another blade.
Randy - If I'm not on the computer than I'm out making sawdust.
Just watched the video, very informative and now ,hopefully, I can set my band saw up better. Excellent, thank you, Blackie.
Jamesw
Thank you Blackie, that really helps.
Jack
