Nathan is right, I bought one without the spring or mount so I made them. These vises were designed to be attached to a flat horizontal surface, not a post. I don't use the post term, I call it a leg vise.
I got fancy with my mount but it doesn't have to be. This one wrps around the rear jaw and bolts onto the bench top incorporating two wedges to hold it tight. It also holds the top of the spring.
Here is a view of the wedges and spring. Also, the screw cap or nut would interfere with mounting it to a vertical surface.
This is the first leg vise I bought that was complete. You can see the U with wedges is a separate piece from from the bench mounting part.
These are great, strong vises Hairy. I have bent steel clamping it in the jaws and hammering on it. Remove the screw from the nut and grease it for smother action. I curious about the coil spring on yours, most originals used a S shaped flat spring.
"Duck and Bob would be out doin some farming with funny hats on." chrisstef