pendant

With the prototype complete, I assembled the remaining two lamps. [20200201-IMG_3503.jpg] [20200202-IMG_3511.jpg] [20200202-IMG_3512.jpg] The bot...

I'm still just dry fitting here in order to see how things would look with a light inside. [20200118-IMG_3418.jpg] The original plan was to mount t...

Installing the veneer strips didn't quite go as planned. My initial idea was to apply a little contact cement to hold the overlapped end in place. ...

Like the spiral pendant, my plan is to use cherry for the ribs and top and bottom caps, anigre veneer, and a BBP ring as the base for the removable...

With the veneer strips adjusted so they formed loops as close to circular as possible (by eye), I scored the ends where they overlapped on either s...

My plan is to have a unique bottom cover design for each of the pendant lamps, and the for the first one I used an "atomic age" motif. Perhaps fitt...

There's nothing much to see here.  With all the pieces sealed, the glue-up took all of 10 minutes. The roll of masking tape was the perfect size to...

Originally posted in January 2020 As part of the Spiral Veneer Pendant Lamp project, I came up with an inner shade to envelope the light bulb: ...