Spinnekop #12: Ankers

379
0

This is part 12 in a 37 part series: Spinnekop

The "boventafelment" is also anchored on the beams with 4 metal anchors. On the drawing these are placed on the outside. But I want to be able to take the cladding off to show the inside. So I will change the layout and put the anchors on the inside



Starting off with some spokes out of a old bicycle


Some heat to bend the steel


The finished hooks are placed alongside the beams


They are placed in a recess so the pancake can sit flush


Drilling nail holes into the anchors


Drilling and nailing (with 0,8×10 mm) the anchor


The end result

Job