Craftisian

MontyJ

227 posts and 11 followers
in over 10 years
0
3

Sewing box phase two #2: Dovetails and a bow front drawer

2423
3

This is part 2 in a 2 part series: Sewing box phase two

  1. Getting started
  2. Dovetails and a bow front drawer

My company vehicle decided to take a couple of days off by crapping a front wheel bearing so I had some extra time to spend in the shop today. Picking up where I left off when I went to Florida, I finished the drawer box. I was determined to have hand-cut dovetails. They didn’t come out too bad, but I still have a lot to learn. Once the box was done, I started on the false front. I thought about a simple flat front, but what fun would that be? I wasted an hour making two nice bowed patterns so I could use the router and a set of skis then promptly decided to do it with a hand plane. I still haven’t finished the Bailey restoral so I used the Kobalt. It did the job. I have a couple ash runners under the drawer and will add guides tomorrow after I attach the false front to the drawer. I’ll also add kickers before I put the top on. The wife took some pictures of the progress:

Where are the band-aids?---Pro Libertate!

3 Comments

lanwater commented over 10 years ago

Some good progress.
The dovetails look fine. Hand cut dovetail is something I have been wanted to learn.
The bow front adds quite a bit to the look.

Abbas, Castro Valley, CA

Lightweightladylefty commented over 10 years ago

Monty,

This is coming along nicely. You did a fine job on the dovetails.

L/W

“Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.” Benjamin Franklin

MontyJ commented over 10 years ago

The dovetails are far from perfect. The camera was kind. I figured the drawer was a good place to practice them since it’s not visible all the time ;-) The bow front actually came out better than I thought it would. I have never used a hand plane for something like this before, and figured it would be a good time to try something new. I really enjoyed it, it didn’t take long at all, and it gave me more confidence in using hand planes.

Where are the band-aids?---Pro Libertate!

More from MontyJ

Gazebo build #4: The finer details and finishing up Gazebo build #3: Roofing Gazebo build #2: Roof framing Gazebo build #1: Laying it out... My first hand plane restoral #2: Cleaning
RSS