How To Make Stopped Chamfers

485
11
Have you ever made stopped chamfers?

Here's how I do it.
I mark out the length of my chamfer. Here it is 6" long.



I mark out 1/2" from each end for the stopped chamfer ends



I mark out 1/4 "  for each side of the chamfer's length


Using a circle template I lay out the arcs for the chamfer ends on both sides



Next I make a stop cut at each end.



Then I start all the chamfering



It's now done!





11 Replies

Surprised on no comments yet!

Nice little tutorial on doing these with hand tools, I've never been brave enough and have always used stop blocks and a 45 bit in the router table. You probably can get a set knocked out before I even get the table set up.

Looks like the foundation for those "lamb's tongues" used on table legs as well.
Yeah....I do my best and no one seems to see it or bother to make comments 😐
Yes I've done lamb tongues this way as well.
 
Well explained.  Thanks for taking the time!
Great tips.  Is there some rule of thumb for determining which size arc to use or do just pick one that looks right to you? 

The lack of some sort of News feed is my biggest complaint about Craftisian.  Unless you follow someone, it is really easy to miss new postings unless you remember to scroll down the forum list looking for new stuff.  

--Nathan, TX. Hire the lazy man. He may not do as much work but that's because he will find a better way.

Yeah, just a simple heading next to "collections" that lists posts in the order they arrive. Maybe a green dot to signify posts you have replied to.
You bring up a good point on the arc size. With out any trickery, doing these on a router table will give a radii the same as the bit. I like stuff that has a radius maybe 1.5x to 2x the depth.

It's pretty much what looks good to you. If you mark it out as I suggested then with your chisel bevel down you start at the corner and make one sweeping arc cut towards the half inch stop cut blending into the chamfer. Normally this arc is a 45° sweep. In learning the technique start with making a couple of these arcing cuts first.

I can drawing up more technical details if it benefits anyone. Just let me know. 

Yes there are definitely some  improvements required in Craftisian's navigation. But who's listening that will make required changes?

Hey Lazyman.... you can always follow me if you want. 
At first I wasn't real sure what that follow thing was about. I'm warming to it.

Nice pic post Rick.