Bentlyj

I'm installing pre-manufactured cabinets. If done quite a few of these, and this brand is the best line I have done so far. It's a small kitchen. I...

A tavern had ordered a credenza with a pop up TV inside it. It came to Vegas from Missouri. The door that opened for the TV to come out had warped....

Cut out the center stile and added a couple of wide pull out shelves. Pre-finished 5/8" BB with 1/2" melamine bottom, rabbeted in. 1/16" dado and b...

Just doing a little painting.  Not much,  some Floating Shelves, Doors and a Counter top [20230103_122152.jpg] After 2 coats of primmer and 1 coat...

I think this is basic,  but will share for anyway. I have 4 doors. With the length of my stock, I can get 1 long and 1 short out of each rip. So I...

Putting a docking plug into a drawer.  I like the swing arm that houses the wires so the don't get out of control. They're expensive, but if the cl...

Here are the two cabinets that will have the lighting I mentioned in part 1. [20221203_112010.jpg][20221203_112018.jpg] I'm also making shelves th...

Building some small upper cabinets that will go above a couple of undercounter wine refers. The cabinets will have LED lights on the bottom and ins...

Building the Columns for the ends. Another Slideshow [4 Belly Columns.jpg]

Trying a slideshow.  Practice run..... This is a wall unit I made a few years back.  [DSC01627.JPG]

Building a Cherry executive desk. Pretty Long Winded,  (More Picture Heavy) Thanks In Advance if you make it all the way through.   Started with a ...

This is no original design by any means, but it is done with all my own measurements. The designer gave me a rough drawing and I redrew it in SU to...